Realize contactless automatic door opening and closing.
TECHNICIAL SPECIFICATIONS
| Model | PK300DC |
| Driving Method | Screw driven piston type |
| Motor Power | DC 24V, 140W |
| Operating Cycle | 20 second per 90(approx) |
| Max. Single-leaf Weight | 300KG |
| Max. Single-leaf Length | 2.5M |
| Gear Box | Worm gear |
| Limit Switch | Stop block |
| Working Temperature | -20℃~70℃ |
| Work Duty | S2 30min |
| Power Supply | AC 110V/220V, 60Hz/50Hz |
| Protection Class | IP 54 |
| Weight | 16KG |
| Standard Configuration | 2 motor, 1 control box with board, 2 remote transmitters, 1 release bar |
| Optional Accessories | Photocell, alarm wall lamp(20V/220V/110V), wireless keypad, wireless wall button, 20W solar panel, 9AH battery box with solar charger |
Installation
PK300DC/PK350DC swing gate opener is applicable to single leaf gate weight less than 300kg, and
length of the single leaf swing gate should be less than 2.5m/3m. The drive mode adopts the worm
and worm gear to combine the screw rod transmission. This gate opener must be installed inside
the enclosure or yard for protection.
Installation Steps
Preparation Before Main Engine Installation
a) Before installing the door opener, please confirm the correct installation of the door to ensure
that the door can be easily manually operated, and the door safety stopper can effectively prevent
the door to continue moving.
b) Install the electric lock, the distance between the door bottom and ground should be 40-50mm. If
not install the electric lock, the distance between door bottom and ground should be ≥20mm;
c) The main engine recommended mounting height is about 300 ~ 800mm from the ground, and
make sure there are reliable fixed points for mounting brackets.
Cable
In order to ensure the normal operation of the door opener and protect the cable from damage,
please use PVC pipe laying motor, power cable, and control cables, and separate two PVC pipes to
lay (motor and power cable) and (control cable), respectively.
Mounting brackets
In order to install the PK300DC / PK350DC main engines firmly, recommend to use the expansion
screws to fix the mounting brackets.
FOR MORE DETAILS, PLEASE REFER TO THE ATTACHED USER MANUAL.
PK300DC PK350DC User Manual.pdf
