The SL600AC gate opener designed for residential use, weight up to 600 Kg and operating distance up to 8 meters.
Compact structure, cost-effective.
2.Keypad / single button interface.
3.Alarm lamp, Photo beam & safety beam interface.
4.User can select auto-close function.
6.Manual key release design for emergency purposes.
7.Automatic stop when hitting obstacle during opening, auto-reverse when hitting obstacle during closing. (Smart version)
MAIN FEATURES
1. AC motor with built-in control unit
2. Keypad/single button interface
3. Alarm lamp, photo beam and safety beam interface
4. User can select auto-close function
5. Soft start and slow stop(smart version, optional)
6. Auto-reverse function when hitting obstacle during closing(smart version, optional)
7. Manual key release design for emergency power failure
8. Gear driven with built-in control board.
9. RF Hopping Code Technology prevents your remote code from being accessible to others.
10. This powerful sliding gate operator can open gates that are up to 8 meter long and weigh 600KG.
11. The remote control has 4 buttons, corresponding to open/close/stop.
12. You can add up to 23 extra remotes that can control this system.
13. In case of a power outage or an emergency you may also use manual release key.
Installation
SL600AC sliding gate opener is applicable to gate weight less than 600kg, and length of the sliding gate less than 12m. The drive mode adopts the rack and gear transmission. This gate opener must be installed inside the enclosure or yard for protection.
Installation procedures
Preparation work before installation
Please make sure that the sliding gate is correctly installed, the gate rail is horizontal, and the gate can be manually moved smoothly before installing the gate opener.
Cable installation
In order to guarantee the normal operation of the gate opener and protect the cables from damages, please bury the motor & power cable and controlling cable separately with two PVC tubes.
Concrete pedestal
Please precast a concrete pedestal with the size can be 400mm x 250mm, depth be 200mm in advance, so as to firmly install SL600AC gate opener. Please make sure the distance between the gate and gate opener is appropriate before casting the pedestal.
